Transition-networks TN-GLC-xx-xx Manuel d'utilisateur télécharger pdf (Page 3)

TN-GLC-xx-xx SFPs

Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours)

Connect fiber cable

to media converter

as shown.

Connect fiber cable

to other device

(media converter,

hub, etc.) as shown

Installing the fiber cables

1. Locate or build 1000Base-SX-compliant or 1000Base-LX-compliant fiber

cable with male TX to RX connectors installed at both ends.

2. Install the fiber cable as shown below.

[email protected] -- Click the “Transition Now” link for a live Web chat.

Cable Specification

Copper cable (Category 5 -- minimum requirement)

• Gauge = 24 to 22 AWG; Attenuation = 22.0 dB /100m @ 100 MHz

• Straight-through OR crossover cable may be used.

• Shielded twisted-pair (STP) OR unshielded twisted-pair (UTP) may be used

• All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a gigabit network.

• Use only dedicated wire pairs for the active pins; e.g., blue/white &

white/blue,

orange/white & white/orange, etc.

• Do not use flat or silver satin wire.

Crossover Cable

Straight-Through Cable

wisted Pair #1

Twisted Pair #1

Twisted Pair #2

wisted Pair #2

1 2 3 4 5 6 7

Pas de commentaire

Transition-networks TN-GLC-xx-xx Manuel d'utilisateur Page 3